BSP Threaded Ends
Working Pressure: 150lbs (psi) / 10bar
Working Temperature: 250°C at 10bar
... Investment lost wax casting manufactured to ISO 9001 : 2015
BSP thread conforms with ISO 7-1/ISO 228-1
Female Threads are Parallel (BSPP)
Mill Test Certificates (EN10201 Type 2.2) available with all sizes
Conical Faced Union
Complete Set including Clamp, 2x Ferrules, and Seal (EPDM)
Clamp is Grade 304
Other material grade Seals available as separate parts
... Butt welds to OD tube
Complete Set including Hex Nut, Male Part, Weld Liner and Stepped Seal (NBR)
Hex Nut is Grade 304
Other material grade Seals available as separate parts
Flat Faced Union
EPDM O-Ring
BSP Threaded Ends
... Female Threads are Parallel (BSPP)
BSP thread conforms with ISO 7-1/ISO 228-1
Working Temperature/Pressure: -29°C to 66°C (20 Bar)
Investment lost wax casting manufactured to ISO 9001 : 2015
Mill Test Certificates (EN10201 Type 2.2) available with all sizes
Complete Set including Slotted Nut, Male Part, Weld Liner and Stepped Seal (NBR)
Slotted Nut is Grade 304
Other material Seals available as separate parts
Complete Set including Clamp, 2x Ferrules, and Seal (EPDM)
Clamp is Grade 304
Other material grade Seals available as separate parts
... Butt welds to OD tube
Complete Set including Clamp, 2x Ferrules, and Seal (EPDM)
Clamp is Grade 304
Other material grade Seals available as separate parts
... Slips over tube
Complete Set including Clamp, 2x Ferrules, and Seal (EPDM)
Clamp is Grade 304
Other material grade Seals available as separate parts.
... Slips over tube
Not to be used for liquids as does not seat against seal in Male Part
Use for empty lines only
Can be used for DIN and DIN Inch unions
... For use with liquids, please use standard DIN Slotted Nut and DIN Union Blank instead
Product Conforms to Hygienic Standard DIN11851
Nitrile (NBR) seal temperature rating 120°C
Nitrile is suitable for oils, hydrocarbon fuels, hydraulic fluids, fats, and flame retardant liquids
Product Conforms to Hygienic Standard DIN11851
BSP Threaded End
Working Pressure: 150lbs (psi) / 10bar
Working Temperature: 250°C at 10bar
... Flat Spot For Ease Of Tightening
BSP thread conforms with ISO 7-1/ISO 228-1
Male Threads are Tapered (BSPT)
BSP Threaded End
Working Pressure: 150lbs (psi) / 10bar
Working Temperature: 250°C at 10bar
... Flat Spot For Ease Of Tightening
BSP thread conforms with ISO 7-1/ISO 228-1
Male Threads are Tapered (BSPT)
Comes Standard With Hex Nut
Hex Nut is 304 grade
BSP Threaded End - BSP Male
Working Pressure: 150lbs (psi) / 10bar
Working Temperature: 250°C at 10bar
... Flat Spot For Ease Of Tightening
BSP thread conforms with ISO 7-1/ISO 228-1
Male Threads are Tapered (BSPT)
No Need For Welding! Save Time And Effort With One-Piece Adapters
BSP Threaded Socket
Working Pressure: 150lbs (psi) / 10bar
... Working Temperature: 250°C at 10bar
Flat Spots For Ease Of Tightening
BSP thread conforms with ISO 7-1/ISO 228-1
Female Threads are Parallel (BSPP)
BSP Threaded End - BSP Female
Working Pressure: 150lbs (psi) / 10bar
Working Temperature: 250°C at 10bar
... Flat Spot For Ease Of Tightening
BSP thread conforms with ISO 7-1/ISO 228-1
Female Threads are Parallel (BSPP)
NBR temperature rating 100°C
NBR is suitable for oils, hydrocarbon fuels, hydraulic fluids, fats, foods, water, glycol and flame retardant liquids
1/2" and 3/4" seals are flat section gaskets (RJTSS12 & RJTSS20)
... FDA Approved
EPDM seal maximum temperature rating 120 °C
EPDM is suitable for general insulation of hot water, steam, alcohols, coolants, acids and bases
FDA Approved
