*Tool, Battery, Charger and Case only*
Press sizes from 15.0mm to 108.0mm
Rotatable head
Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
Ask us about our ex hire tools available for purchase!
Tool comes with full set of compatible pressing heads
Press sizes from 15.0mm to 54.0mm
Work light for safe working
... Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
EPDM Seal
Flange Dimensional Standard: AS2129
Please note: Sizes from 22, 28 and 42 are not manufactured to AS2129 Standard, as the thickness exceeds standard to avoid unacceptable warpage that may occur at standard AS2129 thickness.
... Flanges are forged to: ASTM A182
Temperature rating: -20°C, 120°C
Gas Rated and RapidPress Extreme options available
**Please allow 1-2 days lead time for fabrication**
FlexiFlow Stainless Steel Convoluted Braided Hose
Connections: RapidPress Couplers
... Hose Test Standard: ISO 10380-2012
Hose Designation: TYPE 1-10
Click 'View Dimensions' for the following information:
E = Static/Flexing Minimum Bend Radius (mm)
F = Working/Test Pressure (bar) *Applies to Hose Only, Not End Connections*
EPDM O-Ring - Black
Typically used with Potable Water, Heating, Cooling/Refridgeration, Treated Water, Desalinated Water, Rainwater, Compressed Air
Certificates/Approvals: KTW, W 270, DVGW W 534
... Patented seal ring with lenticular profile which fits the press crimp groove which provides a 20% enlargement of the sealing surface
Fit makes the pipes insertion easier
Tool comes with full set of compatible Pressing Heads (excludes 88.9mm Pressing Head)
Press sizes from 15.0mm to 108.0mm
Rotatable head
... Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
EPDM Seals
Male BSP End
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
EPDM Union Flat Washer - Black
For use with RapidPress Unions
For Unions *with* Male BSP or Female BSP ends, please see our RapidPress EPDM M/F Union Flat Washer
EPDM Seals
Reduced diameter centre leg
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
EPDM Seal
Male BSP End
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
*Tool, Battery, Charger and Case only*
Press sizes from 15.0mm to 54.0mm
Work light for safe working
... Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
Ask us about our ex hire tools available for purchase!
EPDM Seals
Female BSP End
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
EPDM Seal
Female BSP End
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
EPDM Seals
Female BSP Centre Leg
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
EPDM Flat Washer - Black
For use with RapidPress Male BSP Unions and Female BSP Unions
For standard RapidPress Union Gaskets *without BSP ends* please see our RapidPress EPDM Union Flat Washer
Depth Gauge for sizes 15mm to 168.3mm
To ensure a correctly inserted joint, the tube must be witness marked with a fine-point/felt-tip pen where it meets the fitting using the depth gauge so that full insertion can be verified
Suitable for all uses except for with potable water. For potable water capabilites, please see our RapidPress Inox Watermark Approved Press-Fit Tube (RapidPress Inox Press-Fit Tube (WM))
Manufactured to EN10312/EN10217-7
180 Grit Finish
... 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
EPDM Seal
Flange Dimensional Standard: EN1092-1 Type 01/A
Flanges are forged to: EN10222-5
... RapidPress Coupler: 316L
Temperature rating: -20°C, 120°C
Gas Rated and RapidPress Extreme options available
EPDM Seals
RapidPress Coupler Connections
Full Port
... Lockable latch handle
Temperature Rating: -20°C, 120°C
Red handle sleeves available for purchase
RapidPress Extreme options available
**Please note: 76.1x65NB has been fabricated from a standard 65NB BSP Ball Valve and two 76.1 RapidPress Weld Couplers**
EPDM Seals
Complete Set including: RapidPress Tri Clover Adapter (x2), Tri Clover Clamp (304) and Tri Clover Seal
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
RapidPress Extreme options available
M-Profile
Adapter Jaw (AJ76108) required for use of the 76.1mm & 88.9mm Pressing Head. Also for the initial press for 108.0mm Pressing Head
Adapter Jaw (AJ108) required for the secondary press for the 108.0mm Pressing Head
Watermark Approved for use with potable water. If potable water applications are not required, please see our RapidPress Inox Press-Fit Tube
Manufactured to EN10312/EN10217-7
180 Grit Finish
... 6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
Replacement wheel blade to suit the RapidPress Rotary Tube Cutter
Suitable for Stainless Steel, Copper and Aluminium tubing
Suitable for sizes from 15mm to 76.2
EPDM Seals
Complete Set including: RapidPress Tri Clover Adapter, BSP Nipple to Tri Clover Adapter, Tri Clover Clamp (304) and Tri Clover Seal
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
RapidPress Extreme options available
EPDM Seals
Complete Set including: RapidPress to RJT Male Adapter, RapidPress to RJT Female Adapter, RJT Hex Nut (304) and RJT Stepped Seal (NBR)
Temperature rating: -20°C, 100°C
... Maximum operating pressure: 16 Bar (232psi)
RapidPress Extreme options available
EPDM Seal
Flange Standard: ANSI150 (*)
(*) Please note that these are *Non Standard* ASME B16.5 standard. They are flat faced, and are non hubbed.
... Flanges are forged to: ASTM A182 F316L
RapidPress Coupler: 316L
Temperature rating: -20°C, 120°C
Gas Rated and RapidPress Extreme options available
EPDM Seals
Complete Set including: RapidPress to RJT Female Adapter, BSP Nipple to RJT Male Adapter, RJT Hex Nut (304) and RJT Stepped Seal (NBR)
Temperature rating: -20°C, 100°C
... Maximum operating pressure: 16 Bar (232psi)
RapidPress Extreme options available
EPDM Seal
To suit RapidPress Tube sizes
Fastener hole size: 4mm
... Temperature rating: -20°C, 120°C
A purpose designed seal, used when process piping penetrates a wall, floor or ceiling in Food & Beverage Plants or any application where a waterproof hygenic seal is required.
EPDM Seals
Measurement 'D' = Maximum amount of expansion length
Temperature rating: -20°C, 120°C
... Maximum operating pressure: 16 Bar (232psi)
Refer to page 35 in our RapidPress Technical Guide for our Expansion Compensation Table
RapidPress Extreme options available
