RapidPress Inox Extreme Press-Fit System
RapidPress Extreme Reducing Coupler
RapidPress Extreme Reducing Coupler
Features
FKM Seals
Temperature rating: -20°C, 220°C
Maximum operating pressure: 16 Bar (232psi)
EPDM and Gas Rated options available
Related Products
RapidPress O-Ring FKM Seal
RapidPress O-Ring FKM Seal
Features
FKM O-Ring - Green
Typically used with Compresed Air & Oils
Patented seal ring with lenticular profile which fits the press crimp groove which provides a 20% enlargement of the sealing surface
Fit makes the pipes insertion easier
VIEW DIMENSIONS
RapidPress Startup Kit
RapidPress Startup Kit
Features
Kit inlcudes:
Orbital Tube Cutter, Deburrer, Depth Gauge and our RapidPress Technical Manual.
Novopress ACO203 Complete Set 15-54
Novopress ACO203 Complete Set 15-54
Features
Tool comes with full set of compatible pressing heads
Press sizes from 15mm to 54mm
Work light for safe working
Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
Novopress ACO203XL Complete Set 15-108
Novopress ACO203XL Complete Set 15-108
Features
Tool comes with full set of compatible pressing heads (excludes 89mm pressing head)
Press sizes from 15mm to 108mm
Rotatable head
Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
Novopress ACO203XL 15-108 Tool
Novopress ACO203XL 15-108 Tool
Features
*Tool, Battery, Charger and Case only*
Press sizes from 15mm to 108mm
Rotatable head
Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
Ask us about our ex hire tools available for purchase!
RapidPress Extreme Reducing Tee
RapidPress Extreme Reducing Tee
Features
FKM Seals
Reduced diameter centre leg
Temperature rating: -20°C, 220°C
Maximum operating pressure: 16 Bar (232psi)
EPDM and Gas Rated options available
VIEW DIMENSIONS
RapidPress Union FKM Flat Washer
RapidPress Union FKM Flat Washer
Features
FKM Union Flat Washer - Green
For use with RapidPress Unions
For Unions *with* Male BSP or Female BSP ends, please see our RapidPress EPDM M/F Union Flat Washer
VIEW DIMENSIONS
RapidPress Bossed Saddle
RapidPress Bossed Saddle
Features
M10 Boss (17mm long)
Saddle to suit RapidPress Tube
Includes Stainless Steel Metric Fasteners
Larger sizes are available as Clamps
VIEW DIMENSIONS
RapidPress Extreme Bend 45°
RapidPress Extreme Bend 45°
Features
FKM Seals
Temperature rating: -20°C, 220°C
Maximum operating pressure: 16 Bar (232psi)
Gas Rated and RapidPress Extreme options available
VIEW DIMENSIONS
Novopress ACO203 15-54 Tool
Novopress ACO203 15-54 Tool
Features
*Tool, Battery, Charger and Case only*
Press sizes from 15mm to 54mm
Work light for safe working
Analysis of tool performance via NovoCheck app
Data transfer via Bluetooth®
Brushless Motor Technology
Runs Milwaukee® M18™ Battery
Ask us about our ex hire tools available for purchase!
Novopress Pressing Head Set 76-108
Novopress Pressing Head Set 76-108
Features
Full set of pressing heads and adapters from 76-108 (excludes 89mm pressing head)
Comes with it's own carrying case
M-Profile
RapidPress Deburrer Tool
RapidPress Deburrer Tool
Features
Suitable for deburring both pipe/tube internals and externals
Can be used with Stainless Steel, Copper, Brass, Aluminium, Plastic and more
VIEW DIMENSIONS
RapidPress M/F Union FKM Flat Washer
RapidPress M/F Union FKM Flat Washer
Features
FKM Flat Washer - Green
For use with RapidPress Male BSP Unions and Female BSP Unions
For standard RapidPress Union Gaskets *without BSP ends* please see our RapidPress FKM Union Flat Washer
VIEW DIMENSIONS
RapidPress Bossed Clamp
RapidPress Bossed Clamp
Features
M10 Boss (17mm long)
Clamp to suit RapidPress Tube
Includes Stainless Steel Metric Fasteners
Smaller sizes are available as Saddles
VIEW DIMENSIONS
RapidPress Depth Gauge
RapidPress Depth Gauge
Features
Depth Gauge for sizes 15mm to 168.3mm
To ensure a correctly inserted joint, the tube must be witness marked with a fine-point/felt-tip pen where it meets the fitting using the depth gauge so that full insertion can be verified
VIEW DIMENSIONS
RapidPress Inox Press-Fit Tube
EN10312/EN10217-7
RapidPress Inox Press-Fit Tube
EN10312/EN10217-7
Features
Suitable for all uses except for with potable water. For potable water capabilites, please see our RapidPress Inox Watermark Approved Press-Fit Tube (RapidPress Inox Press-Fit Tube (WM))
Manufactured to EN10312/EN10217-7
180 Grit Finish
6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
VIEW DIMENSIONS
RapidPress Extreme to Male BSP Union with Tri Clover
RapidPress Extreme to Male BSP Union with Tri Clover
Features
FKM Seals
Complete Set including: RapidPress to Tri Clover Adapter, BSP Nipple to Tri Clover Adapter, Tri Clover Clamp (304) and Tri Clover Seal
Temperature rating: -20°C, 220°C
Maximum operating pressure: 16 Bar (232psi)
EPDM options available
RapidPress Extreme 3pc Ball Valve
RapidPress Extreme 3pc Ball Valve
Features
FKM Seals
RapidPress Coupler Connections
Full Port
Lockable latch handle
Temperature Rating: -20°C, 220°C
Red handle sleeves available for purchase
EPDM options available
VIEW DIMENSIONS
RapidPress Extreme Flange Table E
RapidPress Extreme Flange Table E
Features
FKM Seal
Dimensional Standard: AS2129
Please note: Sizes from 22, 28 and 42 are not manufactured to AS2129 Standard, as the thickness exceeds standard to avoid unacceptable warpage that may occur at standard AS2129 thickness.
Flanges are forged to: ASTM A182
Temperature rating: -20°C, 220°C
EPDM and Gas Rated options available
Novopress Pressing Heads & Adapters 76.1-108
Novopress Pressing Heads & Adapters 76.1-108
Features
M-Profile
Adapter Jaw (AJ76108) required for use of the 76.1mm & 88.9mm. Also for the initial press for 108mm size heads
Adapter Jaw (AJ108) required for the secondary press for the 108mm size head
VIEW DIMENSIONS
RapidPress Inox Press-Fit Tube (WM)
EN10312/EN10217-7
RapidPress Inox Press-Fit Tube (WM)
EN10312/EN10217-7
Features
Watermark Approved for use with potable water. If potable water applications are not required, please see our RapidPress Inox Press-Fit Tube
Manufactured to EN10312/EN10217-7
180 Grit Finish
6 metre lengths. Purchase per metre (enter quantity as '6' for 1 length)
VIEW DIMENSIONS
RapidPress Extreme Union with Tri Clover
RapidPress Extreme Union with Tri Clover
Features
FKM Seals
Complete Set including: RapidPress Tri Clover Adapter (x2), Tri Clover Clamp (304) and Tri Clover Seal
Temperature rating: -20°C, 220°C
Maximum operating pressure: 16 Bar (232psi)
EPDM options available
RapidPress Extreme Union with RJT
RapidPress Extreme Union with RJT
Features
FKM Seals
Complete Set including: RapidPress to RJT Male Adapter, RapidPress to RJT Female Adapter, RJT Hex Nut (304) and RJT Stepped Seal
Temperature rating: -20°C, 220°C
Maximum operating pressure: 16 Bar (232psi)
EPDM options available
RapidPress Rotary Tube Cutter Blade
RapidPress Rotary Tube Cutter Blade
Features
Replacement wheel blade to suit the RapidPress Rotary Tube Cutter
Suitable for Stainless Steel, Copper and Aluminium tubing
Suitable for sizes from 15mm to 76.2
VIEW DIMENSIONS
RapidPress Extreme to Male BSP Union with RJT
RapidPress Extreme to Male BSP Union with RJT
Features
FKM Seals
Complete Set including: RapidPress to RJT Female Adapter, BSP Nipple to RJT Male Adapter, RJT Hex Nut (304) and RJT Stepped Seal
Temperature rating: -20°C, 220°C
Maximum operating pressure: 16 Bar (232psi)
EPDM options available
FlexiFlow Hose with RapidPress Extreme Couplers
FlexiFlow Hose with RapidPress Extreme Couplers
Features
FlexiFlow Stainless Steel 316 Convoluted Braided Hose (Braiding is 304)
Connections: RapidPress Extreme Couplers (FKM)
Temperature Rating: -20˚C to 220˚C
Hose Test Standard: ISO 10380:2012
Hose Designation: TYPE 1-10
Please ask for further information regarding Bend Radius, Pressure Ratings, Temperature Ratings and more.
Please allow 1-2 days lead time for fabrication
